如何配置docker官方源并用yum安装docker

站长资源 2024/11/24 佚名

2 0 1

本文介绍了如何配置docker官方源并用yum安装docker ，分享给大家，希望对各位有帮助

一、docker的官方安装文档：

https://docs.docker.com/engine/installation/linux/centos/

由docker给的文档可以看出它也只是去配置了一个docker的yum源、然后就通过这个源来安装docker了；在这个文档下我们采用手工配置

的方式

二、配置一个docker用的源：

1、为docker 增加一个新的yum配置文件；touch /etc/yum.repos.d/docker.repo

touch /etc/yum.repos.d/docker.repo

2、docker.repo的内容如下

[docker-ce-stable]
name=Docker CE Stable - $basearch
baseurl=https://download.docker.com/linux/centos/7/$basearch/stable
enabled=1
gpgcheck=0 #我把这里设置成了0、说明我信任了这个源，不对它的rpm进行检察
gpgkey=https://download.docker.com/linux/centos/gpg

[docker-ce-stable-debuginfo]
name=Docker CE Stable - Debuginfo $basearch
baseurl=https://download.docker.com/linux/centos/7/debug-$basearch/stable
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg

[docker-ce-stable-source]
name=Docker CE Stable - Sources
baseurl=https://download.docker.com/linux/centos/7/source/stable
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg

[docker-ce-edge]
name=Docker CE Edge - $basearch
baseurl=https://download.docker.com/linux/centos/7/$basearch/edge
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg

[docker-ce-edge-debuginfo]
name=Docker CE Edge - Debuginfo $basearch
baseurl=https://download.docker.com/linux/centos/7/debug-$basearch/edge
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg

[docker-ce-edge-source]
name=Docker CE Edge - Sources
baseurl=https://download.docker.com/linux/centos/7/source/edge
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg

[docker-ce-test]
name=Docker CE Test - $basearch
baseurl=https://download.docker.com/linux/centos/7/$basearch/test
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg

[docker-ce-test-debuginfo]
name=Docker CE Test - Debuginfo $basearch
baseurl=https://download.docker.com/linux/centos/7/debug-$basearch/test
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg

[docker-ce-test-source]
name=Docker CE Test - Sources
baseurl=https://download.docker.com/linux/centos/7/source/test
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg

三、安装docker:

sudo yum install docker-ce
Loaded plugins: fastestmirror, langpacks
Loading mirror speeds from cached hostfile
Resolving Dependencies
--> Running transaction check
---> Package docker-ce.x86_64 0:17.03.1.ce-1.el7.centos will be installed
--> Processing Dependency: docker-ce-selinux >= 17.03.1.ce-1.el7.centos for package: docker-ce-17.03.1.ce-1.el7.centos.x86_64
--> Running transaction check
---> Package docker-ce-selinux.noarch 0:17.03.1.ce-1.el7.centos will be installed
--> Finished Dependency Resolution

Dependencies Resolved

=====================================================================================================================================
 Package             Arch         Version                Repository            Size
=====================================================================================================================================
Installing:
 docker-ce            x86_64        17.03.1.ce-1.el7.centos        docker-ce-stable         19 M
Installing for dependencies:
 docker-ce-selinux        noarch        17.03.1.ce-1.el7.centos        docker-ce-stable         28 k

Transaction Summary
=====================================================================================================================================
Install 1 Package (+1 Dependent package)

Total download size: 19 M
Installed size: 19 M
Is this ok [y/d/N]: y

四、直接下载rpm包的方式来安装：

1、我在安装docker的时候发现下载的速度只有3kB/s 然而文件大小有19M；就在我感觉安装无望的时候、我机智的想到了自己直接把rpm下载下来

看了下docker.repo 、发现centos7的源地址是 https://download.docker.com/linux/centos/7/$basearch/stable 所以我只要去

https://download.docker.com/linux/centos/7/x86_64/stable/Packages/

用迅雷(我是会员有加速)把rpm包下载下来就行了

下载如下文件：

docker-ce-17.03.0.ce-1.el7.centos.x86_64.rpm docker-ce-selinux-17.03.0.ce-1.el7.centos.noarch.rpm

五、安装docker:

ll
total 19096
-rwxrwxrwx 1 jianglexing jianglexing 19521288 May 30 20:05 docker-ce-17.03.0.ce-1.el7.centos.x86_64.rpm
-rw-r--r-- 1 jianglexing jianglexing  29108 May 30 20:15 docker-ce-selinux-17.03.0.ce-1.el7.centos.noarch.rpm
[root@workstudio docker]# yum localinstall *
Loaded plugins: fastestmirror, langpacks
Examining docker-ce-17.03.0.ce-1.el7.centos.x86_64.rpm: docker-ce-17.03.0.ce-1.el7.centos.x86_64
Marking docker-ce-17.03.0.ce-1.el7.centos.x86_64.rpm to be installed
Examining docker-ce-selinux-17.03.0.ce-1.el7.centos.noarch.rpm: docker-ce-selinux-17.03.0.ce-1.el7.centos.noarch
Marking docker-ce-selinux-17.03.0.ce-1.el7.centos.noarch.rpm to be installed
Resolving Dependencies
--> Running transaction check
---> Package docker-ce.x86_64 0:17.03.0.ce-1.el7.centos will be installed
---> Package docker-ce-selinux.noarch 0:17.03.0.ce-1.el7.centos will be installed
--> Finished Dependency Resolution

Dependencies Resolved

=====================================================================================================================================
 Package         Arch     Version             Repository                        Size
=====================================================================================================================================
Installing:
 docker-ce        x86_64    17.03.0.ce-1.el7.centos     /docker-ce-17.03.0.ce-1.el7.centos.x86_64        65 M
 docker-ce-selinux    noarch    17.03.0.ce-1.el7.centos     /docker-ce-selinux-17.03.0.ce-1.el7.centos.noarch    43 k

Transaction Summary
=====================================================================================================================================
Install 2 Packages

Total size: 65 M
Installed size: 65 M
Is this ok [y/d/N]: y
Downloading packages:
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
 Installing : docker-ce-selinux-17.03.0.ce-1.el7.centos.noarch                                 1/2 
setsebool: SELinux is disabled.
libsemanage.semanage_direct_install_info: Overriding docker module at lower priority 100 with module at priority 400.
 Installing : docker-ce-17.03.0.ce-1.el7.centos.x86_64                                     2/2 
 Verifying : docker-ce-17.03.0.ce-1.el7.centos.x86_64                                     1/2 
 Verifying : docker-ce-selinux-17.03.0.ce-1.el7.centos.noarch                                 2/2 

Installed:
 docker-ce.x86_64 0:17.03.0.ce-1.el7.centos          docker-ce-selinux.noarch 0:17.03.0.ce-1.el7.centos          

Complete!

六、启动docker:

[root@workstudio docker]# systemctl start docker [root@workstudio docker]# ps -ef | grep docker root 4458 1 1 20:22 "color: #ff0000">七、测试docker是否能成功运行：

[root@workstudio docker]# docker run hello-world
Unable to find image 'hello-world:latest' locally
latest: Pulling from library/hello-world
78445dd45222: Pull complete 
Digest: sha256:c5515758d4c5e1e838e9cd307f6c6a0d620b5e07e6f927b07d05f6d12a1ac8d7
Status: Downloaded newer image for hello-world:latest

Hello from Docker!
This message shows that your installation appears to be working correctly.

To generate this message, Docker took the following steps:
 1. The Docker client contacted the Docker daemon.
 2. The Docker daemon pulled the "hello-world" image from the Docker Hub.
 3. The Docker daemon created a new container from that image which runs the
  executable that produces the output you are currently reading.
 4. The Docker daemon streamed that output to the Docker client, which sent it
  to your terminal.

To try something more ambitious, you can run an Ubuntu container with:
 $ docker run -it ubuntu bash

Share images, automate workflows, and more with a free Docker ID:
 https://cloud.docker.com/

For more examples and ideas, visit:
 https://docs.docker.com/engine/userguide/

如下是第一次运行hello-world 这个docker-image 由于它还不存在于本地、所以要下载它、这可能要用一点时间！

以上就是本文的全部内容，希望对大家的学习有所帮助，也希望大家多多支持。

docker,yum,源,yum安装docker,配置docker官方源

广告合作：本站广告合作请联系QQ：858582 申请时备注：广告合作（否则不回）
免责声明：本站资源来自互联网收集,仅供用于学习和交流,请遵循相关法律法规,本站一切资源不代表本站立场,如有侵权、后门、不妥请联系本站删除！

评论“如何配置docker官方源并用yum安装docker”

暂无评论...

《魔兽世界》大逃杀！60人新游玩模式《强袭风暴》3月21日上线

暴雪近日发布了《魔兽世界》10.2.6 更新内容，新游玩模式《强袭风暴》即将于3月21 日在亚服上线，届时玩家将前往阿拉希高地展开一场 60 人大逃杀对战。

艾泽拉斯的冒险者已经征服了艾泽拉斯的大地及遥远的彼岸。他们在对抗世界上最致命的敌人时展现出过人的手腕，并且成功阻止终结宇宙等级的威胁。当他们在为即将于《魔兽世界》资料片《地心之战》中来袭的萨拉塔斯势力做战斗准备时，他们还需要在熟悉的阿拉希高地面对一个全新的敌人──那就是彼此。在《巨龙崛起》10.2.6 更新的《强袭风暴》中，玩家将会进入一个全新的海盗主题大逃杀式限时活动，其中包含极高的风险和史诗级的奖励。
《强袭风暴》不是普通的战场，作为一个独立于主游戏之外的活动，玩家可以用大逃杀的风格来体验《魔兽世界》，不分职业、不分装备（除了你在赛局中捡到的），光是技巧和战略的强弱之分就能决定出谁才是能坚持到最后的赢家。本次活动将会开放单人和双人模式，玩家在加入海盗主题的预赛大厅区域前，可以从强袭风暴角色画面新增好友。游玩游戏将可以累计名望轨迹，《巨龙崛起》和《魔兽世界：巫妖王之怒经典版》的玩家都可以获得奖励。

更新日志

2024年11月24日

如何配置docker官方源并用yum安装docker

VMware配置虚拟机静态IP地址的方法

docker实现导出、导入和数据搬迁

评论“如何配置docker官方源并用yum安装docker”

《魔兽世界》大逃杀！60人新游玩模式《强袭风暴》3月21日上线

更新日志

友情链接